Cleaning & Restoring Your Cars Headlamp Lens for Better Visibility and Safety
The headlamp lens is one of the most important car parts that allows you to see clearly while driving at night. When lens get fogged, turned discoloured or scratched then it is hard to see through which can be dangerous. Luckily, cleaning and restoring your headlamp lens is not that expensive or difficult to do by following simple steps further in the video & it will also explain why you should change yours for better night drives.
Overall, only a few simple tips are needed regarding your headlamp lens to keep it in good shape. For less than $ 20 and about half an hour, you can make the plastic headlight lens cover look as good as new! Here is a complete guide for cleaning and restoring your headlamp lens.
Lens Wash: The first thing to be done is the headlamp lens must be rinsed cautiously using moderate soap and water. Using a soft cloth or sponge gently scrub any dirt, grime and bugs that might have built up over time. Once you have taken the lens out, rinse it with some clean water and allow it to be dried before going for next step.
Sand the Lens: If you see that there is any type of damage to the lens (scratches, discoloration), then you can sand it down with a progression of sandpapers starting from lower grit. What, you then walk up to 600-grit sandpaper size,800 -grit and1000? Do not forget to splash some water on the lens before sanding so you can avoid deeper scratch.
Wipe the Lens: Rinse with warm water, and dry with a soft cloth after finishing sanding. Buff the lens in round motions to clear up any impurities present using polishing compound (until it looks shiny). Scrub until the scratches are removed, repeat as needed.
Protect the Surface of your Headlamp Lens: This clear coat will help protect your headlight restoration on any automotive lens housing that it is applied to where UV exposure and environmental fallout would normally deteriorate a freshly polished surface over time. You just spray it on the lens and then let it dry before you go out in your car.
If cleaning and polishing your headlamp lens sounds a bit much then consider just replacing it with new one. Different headlamp lens brands several top on the market have some unique advantages for all drivers;
Philips Headlamp Lenses: Philips is a trusted brand that offers crystal clear visibility and night time driving safety. All of their lenses are chemical and scratch-resistant.
Sylvania Headlamp Lenses - With their polycarbonate material, Sylvania lenses help repel weathering and are also designed to keep from cracking or yellowing.
Hella Headlamp Lenses: The Hella lenses feature a top of the line finish that can really compliment your cars looks. This also can help reduce light distortion without so much glare and lead to better illumination.
Headlamp Lens Upgrade: If you are a person who is often driving or traveling at night, then one of the most important things to maintain your safety while running could be an upgrade in Headlight lens. Continue reading for reasons you may want to replace your headlamp lens sooner than later.
Better Protection: Installation of a new headlight lens increases the overall visibility for your car, and this helps in preventing any accidents with cars that are coming from reciprocal ends by shining brighter lights.
Safer Driving: Replacing your headlamp lens makes it easier to avoid accidents when driving in low light conditions.
There is also an aesthetic superiority associated with replaced headlamp lenses as it enhances the look of a car and thereby can add value to its resale resulting into high profits.
While the task of switching out your headlamp lens may seem daunting, it is a relatively simple one if you take the proper measures to do so. Here's a step-by-step guide for how to replace the headlamp lens on your own.
Buy a Replacement Lens: Make sure to purchase the type of headlamp lens used on your specific car, make and model.
How to safely remove the old lens: Unscrewing or unclipping of new lens is always a great idea Example photo showing someone gently sliding putty knife under parting line to loosen seal.
3rd Step: Set the New Lens Place adequately secure it with Silicone Sealant Fasten the lens into place with screws, or pin clips.
Step 9: Test the new lensBefore putting everything back together, try out your headlamp with a quick turn on to make sure it illuminated correctly.
To summarize, keeping the headlamp lens is crucial to prevent accidents whilst driving. After reading this guide, you can fix the headlamp lens yourself restore it at home and even buy a top brand replacement if need be to have better sight when driving your car slices.
Our business headlamp lens on providing high-quality automotive accessories, covering several products like headlights taillights, bumpers, and bumpers. We are able to meet the requirements of our clients whether it's regular maintenance or a customized modification.
dedicated to providing customers one-stop procurement integrating a variety of automotive parts products, while simplifying purchasing process. platform all that customers require meet their requirements for accessories, while saving them time effort enhancing efficiency of headlamp lens.
primary goal to ensure that customers satisfied. goal. We offer professional after-sales support with technical assistance, installation advice as well as maintenance guidance. team has headlamp lens capacity to respond rapidly customer inquiries, ensuring that they do not have to anxiety throughout the buying and using process.
offer OE (original equipment) headlamp lens factory-quality ensure compatibility with the vehicle origin and ensure highest performance. We also offer wide assortment modified parts allow customers modify their vehicles and enhance the performance and appearance.